Composite film curing room
2019-11-26
Ripening is also called curing, which is a process in which the composite film is placed in a drying room (curing chamber) to react and cross-link the main agent and curing agent of the polyurethane adhesive and interact with the surface of the composite substrate. The main purpose of curing is to fully react between the main agent and the curing agent within a time period to achieve optimal composite strength; the second purpose is to remove low-boiling residual solvents, such as ethyl acetate, etc.
Related News
Composite film curing room: How to do a good job in curing management?
Characteristics of four-wheel electric forklifts
Characteristics of four-wheel electric forklifts
Several reasons leading to power consumption of industrial integrated chillers
Composite film curing room: How to do a good job in curing management?
The management of the composite process cannot ignore every detail. Only by implementing every work in a practical manner and achieving "controllability" can we obtain the best composite effect.
Characteristics of four-wheel electric forklifts
Four-wheel electric forklifts are suitable for use in workshops, warehousing, logistics, cold storage, stations, docks, supermarkets, etc.
Characteristics of four-wheel electric forklifts
Precautions for composite film curing chamber
Several reasons leading to power consumption of industrial integrated chillers
As the condensation temperature increases, the compressor compression ratio increases and the energy consumption per unit cooling capacity increases.
Contact
You can contact us in the following four ways, and we will communicate with you immediately upon receiving your inquiry!
1. Call us.
2. Send an email.
3. Leave a message.
4. Add WeChat or WhatsApp.
